Polyurethane flexible bollards
Ideal solution in a location that is likely to be frequently hit by vehicles
Flexible bollards are manufactured from terrathane, a highly flexible type of polyurethane, the bollards are designed to bend and fold up to 90 degrees before standing right back up in its original position when the load is removed.
Not only does this reduce the damage to a vehicle upon impact, it avoids the need to replace the bollard in the event of an incident or crash and means they can be run over time and time again without damage.
Key Features
- A highly durable and resilient material that will never require painting.
- Coloured all the way through, so even if scratched there is no change in colour
- Can be run over time and time again without damage
- 10-year warranty as standard
- 100% weather-proof, scratch-resistant bollard
- Cost-saving as removes the need for bollard replacement
- Require no maintenance once installed
- Range of diameters available to choose from
- Available with rounded or domed tops.
- Supplied in black as standard with alternative colours can be made to order
- Available in 2 sizes and a Manchester style
- The bollard is completely ridged in the upright position
Where is the best place to use flexible bollards?
Recognising there are locations where there is a need for bollards which flex when hit rather than require replacing or refitting, flexible bollards are Ideal for making high traffic areas safe, such as loading bays and site entrances.
They can also be used on roads to highlight traffic islands and junctions, or in car parks, on pavements or around buildings to protect premises.
This 100% weather-proof, the scratch-resistant bollard can be driven over and hit and will revert back to the upright position again without causing any damage to the ground or the bollard itself.
Specifications
Material: Terrathane
Bollard will fold 90 degrees
Domed bollard top
1000mm above ground height
Colour: Black with coloured reflective tapes (options available)
300mm depth below ground
Available in diameters of 130mm (weight 5kgs) or 155mm (weight 7kgs)
Wall thickness for 130mm bollard is 9mm or 12mm for 155mm bollard
Gates with your logo and colours
A business’s logo is the most obvious and important part of a brand’s visual identity. The gates of virtually any type of industrial, commercial premises or school will be the first thing that visitors, employees or customers will see. At Procter, we believe that our sliding gates and swing gates should not only be designed with their functional purposefully in mind but also that they visually reflect the business they are there to protect.
Why not make the entrance gates to your premises a visual statement about your business as well as doing the obvious security task? A superbly branded gate can do just that.
We can apply logos to sliding gates and swing gates in a variety of ways, including laser profiled steel sheet to transfers being applied to flat surface areas of the gates. All the logos are accurately reproduced with the correct typeface, proportions and colour.
Colour is as important an element of a visual identity, the gates should also reflect the house colours used elsewhere – e.g. on printed communication, website and vehicle livery. At Procter Contracts, we’re able to exactly match any colours including the non-standard RAL colours.
Automatic and manual balustrade gates
An alternative to steel palisade gates
Balustrade gates are an alternative to steel palisade gates and are generally used where aesthetics are also important. As an example, a tubular steel balustrade gate would more typically be used on a more prestigious site and one where the company had important visitors coming to it, whereas a palisade gate would more typically be used on an industrial site where the majority of the access was for employees, suppliers etc.
Finish – Hot Dip Galvanised to BS EN ISO 1461:2009 and polyester coated to a range of RAL colours
* Matching pedestrian gate available
* Automation and Access Control available (Including CE marked safety equipment, meet Health & Safety requirements)
Applications
- Schools
- Prestigious Main Entrances
- Perimeter – medium security
- Airports
- Commercial Premises
- Industrial Units
Specifications
Gate height: 1.0 – 5.0m (wide range of heights available to suit your application)
Gate opening width: 1.0m – 16m (wide range of width available to suit your application)
Automatic and manual welded mesh gates
Secured with tamperproof fixings
Mesh gates are designed and fabricated from tubular steel frames, clad with welded mesh or chain link (secured with tamper proof fixings) to suit the fence style. Procter mesh entrance gates are made to be robust and secure to withstand regular frequent usage over a long time.
Including CE marked safety equipment, meet Health & Safety requirements.
Finish – Hot dip galvanised to BS EN ISO 1461:2009 and polyester coated to a range of RAL colours
Applications
- Schools
- High perimeter security
- Utilities;
- Airports;
- Retail;
- Sports & Recreation;
- Industrial Units;
- Warehousing
Specifications
Gate height: 1.0 – 5.0m (wide range of heights available to suit your application
Gate opening width: 1.0-16m (wide range of width available to suit your applications)
What are palisade gates?
Robust construction and anti-corrosion finish
Palisade gates can be used with palisade fencing or other types of fencing or walling to secure access points. We manufacture standard and custom palisade gates for vehicles and pedestrians, and our vehicular gates can be specified as single- or double-leaf swing gates, sliding gates (tracked or cantilevered) or telescopic gates. Furthermore, we offer a number of power and automation options, plus a choice of access control systems.
Our palisade gates are manufactured entirely from steel and are hot-dip galvanised for a long-lasting, corrosion-resistant finish. A tough polyester powder coat can be applied on top of the galvanising for improved aesthetics and additional corrosion protection; standard colours are green and black, but we can apply almost any other colour on request.
Depending on the size and specification, a palisade gate will normally be fabricated with a steel frame of square hollow section, braced as required. Pales are W or D section and attached using zinc-plated steel bolts and shear nuts, or stainless steel rivets for higher security. Adjustable hinges provide for easy installation and alignment, while a slide latch is installed as standard, with provision for a heavy-duty padlock. Double-leaf gates are equipped with drop bolts.
Key Features
- Palisade gates are manufactured from steel and provide good security thanks to their resistance to cutting and climbing. We offer palisade gates in a wide variety of sizes and specifications, which makes them a very versatile option for perimeter security. Typically our palisade gates comply with relevant sections of BS 1722-12 (Fences – Specification for steel palisade fences) – be aware that some suppliers sell lower-specification palisade gates that are not compliant.
- All of our palisade gates are hot-dip galvanised in accordance with BS EN ISO 1461 (Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods). We also offer the option of polyester powder coating in black, green or your choice of colour, carried out in accordance with BS EN 13438 (Paints and varnishes – Powder organic coatings for hot-dip galvanised or sherardized steel products for construction purposes).
- The steel pales can be D-section, W-section for higher security or other sections are available on request. Pale material thickness depends on the fence height and level of security required, and the pale head style options are rounded, rounded and notched, single-spiked or splayed triple-spiked. Standard fixings are galvanised steel bolts with tamper-resistant shear nuts, or stainless steel rivets can be used for higher security.
- Palisade gates offer advantages over alternative types of security gate thanks to their robust construction, resistance to damage, the difficulty of climbing and visibility through the gaps between the pales. Our in-house design and fabrication capabilities mean we can easily adapt standard designs or create totally bespoke gates to suit your site requirements.
- We only use our own teams of trained installers, not casual labour, so we can guarantee the quality of the installation. Alternatively, we can supply gates for installation by you or your contractor.
- Thanks to their robust construction and anti-corrosion finish, palisade gates require little or no maintenance over their long lifetime. However, should a gate suffer any damage, we can readily replace individual pales or repair the framework.
Applications
- Industrial Units
- High Perimeter Security
- Utilities
- Airports
- Retail
- Warehousing
Specifications
Heights: 1.8 m to 5.0 m (contact us with your requirements)
Widths: 1.0 m to 16.0 m (contact us with your requirements)
Pale profiles: D-section or W-section (other sections available on request)
Pale head styles: rounded, rounded and notched, single-spike, splayed triple-spike
Pale material thickness: D-section 2.5 mm to 3.5 mm W-section 2.0 mm to 3.0 mm
Framework: 60 x 60 x 3 mm SHS for main frame, 50 x 50 x 5 mm for sub frame
Posts: 150 x 150 x 5 mm SHS
Hinges: adjustable
Latch: sliding with provision for heavy-duty padlock
Fixings: zinc-plated steel bolts with shear nuts as standard (stainless steel rivets available for higher security)
Finish: hot-dip galvanised plus optional polyester powder coating in green, black or other colours on request
Compliance: BS EN 1722-12, BS EN ISO 1461, BS EN 13438, powered and automatic gates are CE Marked to the Machinery Directive
Additional security measures: contact us to discuss options (eg barbed wire, razor wire or rotating toppings, monitored electric pulse fencing)
Automation options: powered sliding, swing and telescopic gates, plus various access control systems (contact us to discuss your requirements)
Automatic bollards boost your site’s safety
Supplement security and protect vulnerable areas
Automatic bollards are used in particular doorways which can be vulnerable to being rammed by a vehicle.
Automatic bollards are also often referred to as telescopic bollards, the basic idea is that bollard can be lowered so it is below the ground surface. Applications are typically for either security or controlled access reasons – e.g. the entrance to a pedestrianised town centre area.
Designed to control the access of vehicles to residential areas and commercial properties, Procter Automatic Bollards are manufactured from high-quality stainless or galvanised steel. These bollards are available in diameters of 127mm or 275mm and heights of 600mm or 800mm to suit customer needs. All Procter Automatic Bollards are compatible with a variety of different control mechanisms including remote controls, keypads and swipe cards. Procter recommends that bollards are placed no further than 1,200mm apart to ensure no vehicle may pass between them.
Key Features
- Designed for intensive use.
- Standard finish is anthracite grey (painted).
- Other colours are available – RAL numbers must be supplied.
- Stainless steel finish is available (Satin finish).
* Induction Loop and Vehicle detectors
Inductive loop detectors or potoelectric cell systems control the barrier by detectiing vehicles. Inductive loops detect the interactive field change of a vehicle as it passes over its wound cable ‘loop’. Photoelectric cells use a reflective beam, ‘sensing’ an object when the beam is broken.
* Remote Controls
Push buttons and switches provide easy local control of the barrier, for barrier systems that are permanently manned. Alternatively, a key switch can be fitted to the barrier cabinet with control override raise & lower commands (key may be removed at any position).
* Card Technology
Magnetic stripe and proximity card technologies provide the ideal solution for controlling access for a large number of users. Each card is encoded with a site code and an individual number, providing very secure access control and easy system management. Timed allocation and capture (Magnetic stripe only) systems are also available.
* Intercom/Video
Intercom systems provide easy remote verification before allowing visitor access. The only effective system for providing visitor access to a site. Site Surveys are advised for all automatic systems to ensure correct, safe operation and the most suitable control combinations are selected. Suitable signage is recommended to ensure drivers and pedestrians are aware of automatic barrier operation. Safe provision should always be allowed for pedestrians where required.
When rising bollards are used, we can also install a wide range of options for access control, such as key switch, keypad and card reader, or remote control and monitored via CCTV. Other access control systems are available, please ask for more information.
Anti-terrorist bollards can also be supplied, or view all bollards options.
Specifications
Diameter: 127mm or 275mm
Height available: 600mm, 800mm
Wall thickness: 6mm
Raising speed: 15cm/second
Lowering speed: 25cm/second
Impact resistance: 40,000J
Breakout resistance: 250,000J reinforced version
Environmental recycled plastic bollards
Highly versatile and suited for a wide range of applications
Recycled plastic bollards have become increasingly popular in recent years, and this partly driven by the larger amounts of household plastics which now find their way to recycling facilities and therefore more products are being manufactured from the raw material. This has also resulted in a wealth of different designs for recycled plastic bollards, plus it has also made them a relatively cost-effective solution.
Highway Standard reflective bands can replace the existing reflective bands.
Key Features
- The preferred option for many retail parks
- Extremely durable and 100% recyclable
- Self-adhesive reflective strips can be added to the neck of the bollard if required
- Designed to be malleable, but very durable, with a high impact strength
- Flexible with no sharp edges, making them safe for pedestrians, cyclists and drivers