Hoop perimeter barriers
Most versatile products
Hoop barriers are one of our most versatile products. Customers use them for boundary demarcation, perimeter security, restricting vehicle access, shopping trolley bays, bicycle parking and separating pedestrian and vehicular traffic. A key benefit of hoop barriers is that they do not restrict vision in the same way as fencing or railings.
We offer different styles and sizes of hoop barrier to suit the application requirements and customer preferences. They are manufactured from mild steel and galvanised to provide long-term protection from corrosion. An optional powder coated finish, applied on top of the galvanising, can be in high-visibility yellow and black or the customer’s choice of BS or RAL colours. As an alternative, we can supply and install stainless steel hoop barriers formed from 48 mm diameter tubing.
Our mild steel hoop barriers are available in tube diameters from 48 to 90 mm, lengths from 500 to 2000 mm and heights of up to 1000 mm above ground level.
Key Features
- Available in sizes 500mm – 2000mm wide.
- Four tube diameters to choose from (48mm, 60mm, 76mm, 90mm)
- Available in stainless steel, galvanised mild steel or galvanised and coated mild steel.
- Can be used to secure a large area against vehicle traffic.
- An aesthetically pleasing alternative to traditional fencing.
- Manufactured in the UK to your exact requirements
- Available in ragged (for casting in), flanged (for bolting down) or removable (lockable with a padlock)
- Horizontal rails and central legs available on request.
Specifications
Tube diameter galvanised finish – 48, 60, 76 or 90mm
Tube diameter stainless steel – 48mm
Height above ground – up to 1000mm
Overall length – up to 2000mm
Manual arm barriers
Control access to private car parks and sites
Our manual arm barriers are ideal for controlling access to private car parks and sites where someone is available to operate the barrier at the times when it is needed. Outside normal operating hours, the boom can be locked in either the lowered or raised position.
Each manual arm barrier is constructed from galvanised mild steel with a lightweight aluminium alloy arm. As standard the mild steel components are finished with a tough polyester powder coat in blue, while the boom is finished in red and white bands. However, custom colours can be applied on request. Further options include skirts, fixed and removable catch posts, and a ‘pogo stick’ support attached to the end of the boom.
Maximum boom length is 7m but, if the roadway is wider than this, we can install manual arm barriers in pairs.
More information about our manual arm barriers is available via the download links.
Key Features
- Galvanised mild steel construction, painted blue as standard
- Lockable in the raised and lowered position
- Single boom up to 7.0m
- Double barriers available for larger road widths
- Skirt option available up to 6.0m (skirt is aluminium)
Specifications
1208mm (approx) overall height
Boom lengths 3000mm – 7000mm
Ragged barrier 600mm below ground
Ragged catch post 300mm below ground for catch post
One-way flow plates
Control traffic in and out where traffic must travel in one direction only
Our one-way flow plate solves the problem of controlling traffic in and out of car parks or around sites where traffic must travel in one direction only. Installed in groups, typically six per 3 m wide roadway, the robust flow plates are pushed down as a vehicle passes over in the correct direction, then the weighted plates flip back up after the vehicle has passed. However, if a vehicle attempts to pass in the wrong direction, the flow plates do not deflect out of the way. One-way flow plates are therefore extremely effective at enforcing traffic flows.
One-way flow plates are manufactured from steel, galvanised to provide protection from corrosion, and finished with a tough, high-visibility yellow paint. A heavy-duty rubber buffer on the reverse of the plate minimises noise.
Sets of one-way flow plates are installed by casting in concrete and we recommend that they are used in conjunction with speed ramps and warning signs. They are not suitable for use where HGVs are present.
Key Features
- All fabrication of galvanised steel construction
- Top plates are painted finish
- Heavy-duty rubber buffer
- Ragged for casting in only
Additional information
- It is recommended that One-Way Plates are used in conjunction with speed ramps.
- Not suitable for HGV use.
- It is strongly recommended that signs warning of the use of One-Way Flow Plates are used.
Specifications
| Inner section | Shoulder |
|---|---|
| Length 500mm | Length 210mm |
| Width 420mm | Width 420mm |
| Height 50mm/75mm | Height 50mm/75mm |
Speed ramps
Highly effective way to control traffic speeds
Our modular speed ramps are a simple, highly effective, durable and maintenance-free solution.
Manufactured from heavy-duty recycled PVC with integral white reflectors, the speed ramps are supplied in packs of yellow and black inner sections and a pair of shoulder sections. Each pack comprises sufficient sections to suit the customer’s roadway width. The speed ramp is easy and quick to install by you, your contractor or our team of installers.
We offer two heights of speed ramp: the 50 mm ramp is designed to reduce vehicle speeds to approximately 10 mph, while the 75 mm ramp slows vehicles to approximately 5 mph.
Note that our speed ramps are suitable for use by HGVs weighing up to 44 tonnes but they should not be used by solid-tyred vehicles such as forklift trucks.
See also our one-way flow plate.
Key Features
- Made from heavy-duty recycled PVC
- Each segment includes white reflectors which provide excellent night and bad weather visibility
- Both ends and inners are available in black and yellow
- Segments are sold separately to accommodate any road width
- All bolts, fixings and reflectors are included with the ramp segments (bolts supplied are recommended for concrete fixings)
- Also suitable for HGV’s up to 44 tonnes
- Not suitable for solid tyred vehicles such as solid tyred folk lift trucks
Specifications
| Inner section | Shoulder |
|---|---|
| Length 500mm | Length 210mm |
| Width 420mm | Width 420mm |
| Height 50mm/75mm | Height 50mm/75mm |
Swing barriers
A simple and cost-effective way
Procter swing barriers are simple and cost-effective if you need to control access to car parks, industrial sites or commercial premises, but only on an occasional basis. The barriers are easy to use thanks to self-latching at the catch posts, and they are padlockable in the open or closed position. Different designs are available, depending on the opening width and customer preferences.
Finish – All of our swing barriers are manufactured from mild steel, galvanised for long-lasting protection against corrosion, and finished with a tough polyester powder coating. The standard colour is red, but this can be complemented with reflective white tape or, alternatively, the barriers can be finished in black with reflective yellow tape. Other colours are available on request.
The maximum boom length for a single barrier is 6 m but swing barriers can be installed in pairs for use with wider roadways.
Key Features
- The gate can be secured with the minimum of user intervention due to the spring loaded Self Latching mechanism
- Padlock can be used to secure the gate in the open or closed position (recommended).
- White/red class 2 reflectors.
- Adjustable hinges allow on-site adjustment to ensure that the gate and catch post are correctly aligned.
- The catch post has a reduced height making the release mechanism of the gate easier and reduces the risk of trapped fingers.
- Added safety features include: Skirt height of 550mm (approx car bumper height).
- Double gates are also available with central locking or double removable catch post.
- Additional catch post is required to lock gate in “open” position.
Specifications
Boom length up to 6.0m, 60x60x3mm steel
996mm to underside of boom
Steel pivot post 120x120x5mm thick
Catch post of 90x50x3mm thick
Catch post adjustable to +/- 70mm
Column and pipe protectors
Protect vulnerable corners and columns at bumper height
Procter column and pipe protectors are highly durable, manufactured from mild steel and galvanised to ensure longevity. They are functional and robust in design, incredibly hardwearing. Especially ACP5 column protectors provide perfect low-level protection for vulnerable columns from any vehicular damaage across a range of commercial and industrial environments.
Suitable for both internal and external use, optional reflective tape can be added to maximise visibility. Supplied ragged as standard, flanged versions are also available.
Key Features
- 3 bolts are required for bolting down
Specifications
| Finish | Galvanised (mm) | Powder coated (mm) | Stainless steel (mm) |
|---|---|---|---|
| Tube | 48 O/D | 60 O/D | 80 O/D |
| Flat | 50 x 10 | 60 x 10 | 80 x 10 |
High visibility bollards
Provide protection in both internal and external environment
The Procter range of Hi-visibility Bollards is galvanised mild steel, ensuring their longevity and are designed to take the knocks and bumps that occur in factories and distribution centres etc.
The bollard is coated black with reflective yellow bands.
Specifications
| Products | Height | Range of diameter | Wall mild steel |
|---|---|---|---|
| Bollard 1000 | 1.0m | 90mm, 114mm | 3mm |
| 139mm, 168mm, 193mm | 5mm | ||
| Bollard 1200 | 1.2m | 139mm, 168mm, 193mm | |
| Bollard 1500 | 1.5m | 139mm, 168mm, 193mm | 5mm |
High visibility perimeter barriers
All are galvanised mild steel
The Procter range of High-visibility Perimeter Barriers are suitable both internal and environments – e.g. for warehouses and distribution centres. All products in the range are galvanised mild steel, ensuring their longevity and are painted yellow and black.
The barriers are made in 48mm outside diameter tube and are 1,000mm tall, coated yellow with black reflective bands, and are available in 1,000mm, 1,500mm & 2,000mm wide versions. They are available with or without a horizontal rail.
Key Features
- Fully galvanised
- Coated black with yellow bands
- 48mm, 60mm, 76mm or 90mm Steel Tube
- Ragged or flanged
- 500mm to 1000mm above
- 500mm to 2000mm wide
- Optional horizontal cross rail
The product is designed to be located anywhere a physical barrier is required to protect product, machinery, racking or similar.
Low-level protection rails
Provide high visibility protection in both internal and external warehousing environments
The Procter range of Black & Yellow products is ideal for providing High Visibility protection in both internal and external warehousing environments. All products in the range are galvanised mild steel, ensuring their longevity and are designed to take the knocks and bumps that occur in all warehouses.
The Low-level Protection Rail is made in 76mm outside diameter tube, is coated yellow with black reflective bands and is available in 500mm, 1,000mm & 2,000mm long versions (1,000mm version shown).
The product is designed to be located in anywhere a physical barrier is required to protect product, machinery, racking or similar.
Key Features
- Manufactured from galvanised mild steel tube with bevelled ends.
- Yellow/black finish as standard, red/white finish available
- Surface mounted only, 4 bolts required per rail
- Other lengths and sizes available on request
Specifications
Overall diameter – 76mm
Standard length – 500, 1000 and 2000mm overall
Tree grilles
Long-lasting protection for tree roots
Our range of tree grilles includes styles to suit both classical and contemporary urban landscapes. Whether you want a round or square tree grille, we have something to offer that will provide long-lasting protection for tree roots.
All of our tree grilles are manufactured from tough, weather-resistant and UV-resistant polyurethane, with a black finish as standard. They feature small apertures that do not present a trip hazard to pedestrians, yet they are robust enough to withstand vehicular traffic.
More information about our range of square and circular tree grilles is available via the links below.